With the vertical stabilizer there is another part which is called Rudder. The control surface of the Stabilizer is called as the Elevator. The control surfaces of the Wing are called as the Ailerons.
The Wing edge on the tail side is the trailing edge of the wing. The Wing edge on the nose side is the leading edge of the Wing. The Length of the Wing is referred to as the Wingspan. This way you can use a single brushless motor.įirst, let’s take a look at the different parts of the RC airplane and then we will start the RC Plane design calculations. You can make the lighter version of the same RC airplane using foam board sheets. The reason I am using two brushless motors is that my RC plane is made of Balsa wood and it’s a little heavier. Don’t be afraid if I am using two brushless motors it has nothing to do with the basic RC plane designing. Finally, I did calculations for this big RC plane.
Build your own remote controlplane set how to#
So, I will explain in detail how to keep the same aspect ratio even if you cut some parts of the RC Airplane.Īnyhow, before designing and making the bigger RC airplane I started with the micro version of the airplane to test my calculations and I was pretty happy with the results. When you cut parts of the model it really affects the aspect ratio and interns it affects the RC plane stability. There are important things which I will also explain with the help of these 3d models, you can see this one is normal and to the other one the aerodynamics is applied. It really doesn’t matter whether you are using Balsa wood, Styrofoam, or other types of foam board sheets, or 3d printed parts, the calculations will remain exactly the same.
I will explain in detail how to calculate each and every part of the RC plane so that you can make smaller or bigger RC Airplanes. So, in this tutorial, you will learn how to design and build your own RC airplane. So, I started to study some research papers, watched a lot of videos, and finally, I was able to start my own RC Plane designing. As an engineer, I am supposed to design my own RC airplane rather than using a readymade template. As this was my first time flying an RC airplane I was very happy, but still there was something missing, I wasn’t feeling that inner happiness. I learned a lot of new things while working on the RC paper airplane. RC Plane Designing, Making, and Flight Test- In my previous tutorial, I explained how to build an RC Paper airplane using a readymade template, how to set up the Flysky FS i6 transmitter, and I also shared the flight test results.
0 kommentar(er)
